Products
The chem 200 PRO analyzer is just the perfect solution for high-quality laboratories.
Hardware and software are tested to reduce lab costs and simplify workflow.
The Chem 200 PRO is an easy-to-use analyzer. It is easy to use and also easy to maintain, thanks to the excellent graphical user interface with integrated touch screen and QRCODE reader, fully automated maintenance procedures, and dedicated reagent QRCODE for lot capture expiration and other key parameters.
The sampling module uses a 30-position removable reagent rack. The housing is Peltier cell refrigerated so as to maximize the on-board stability of the reagents. It can analyze up to 60 samples for up to 200 tests/hour.
The Chem 200 PRO is also available in a VET version in combination with its own dedicated and barcoded reagents. The VET analyzer provides customizable reports for each animal species, is easy to use, and allows the creation of a variety of profiles, such as generic, pre-op, post-op, liver, kidney, and metabolic.
Remote diagnostic control allows service staff to resolve errors quickly and efficiently without an on-site visit.
| System Type | Fully Automatic, Random Access, STAT sample priority |
| Throughput | Up to 200 tests / hour |
| Analysis Methods | Endpoint (Bichromatic-Differantial-Sample blank), Kinetics, Fixed-Time, Turbidimetry |
| Calibration Curve | Linear, Non Linear, Cubic - Spline, Multi Point, Log - Logit |
| Sample Type | Serum, Plasma, Urine, CSF |
| Sample Positions | Removable tray, with 60 positions - Optional 20 tubes + 20 Hitachi cups = 40 positions |
| Sample Volume | 2 - 300 μl |
| Sample Cuvettes | Tubes of 12 -13 mm, 5 - 7 ml / cups of 0.5-1.5 ml (require a metal adapter) - optional 20 tubes of 12 -16 mm / 20 cups (Hitachi type). |
| Sample Dilution | Yes - Automatic by software |
| Stat Samples | Yes |
| Sample Barcode | Internal barcode reader (optional) |
| Reagent Positions | Removable Rack with 30 Reagent positions with cooling |
| Reagent Volume | 5 - 350 μl |
| Reagent Bottles | 20 ml and 50 ml |
| Pipetting Technology | Capacitive Liquid Level Detection; needle shock sensor; Ceramic glass coated needle |
| Reagent Storage | Cooling for Reagent Rack with independent power supply |
| Reagent Barcode | Hand barcode reader included |
| Power Supply | 100-240 Vac, 50/60 Hz, single phase with ground |
| Size / Weight | 65 x 65 x 50 cm (W x D x H), 50 kg |
| Reaction Cuvettes | 80 washable BIONEX® cuvettes which allow approximately 20000 tests for a fully loaded rotor |
| Reaction Volume | 210 - 350 μl |
| Reaction Time | Up to 10 min |
| Reaction Temperature | 38°C ± 0.1°C |
| Optical Source | 1 halogen lamp (6 V, 10 W) with extended UV emission |
| Optical Range | 0-3 Abs Linearity ±0.5% from 0.1 to 1.5 Abs |
| Optical Path | 6 mm |
| Wavelength | 8 interference filters of 340, 405, 505, 546, 578, 600, 650, 700 nm, 1 free position, 1 solid position for dark reading |
| Photo - Amplifier | Photoelectric detector, Signal amplifier, response range, 340 nm to 900 nm |
| Diluter Syringe | 368 μl capacity, long-life syringe |
| Hydraulic System | 8 self-priming peristaltic pumps (life 800 hrs), 2 vacuum pumps, Pinch Valve |
| Wash Station | Needles: 6 dispensating, 6 aspiration, 1 clearing (8 step washing sequence for each cuvette). Less than 3 l/hour water consumption. |
| Needle Wash | Internal and external with system solution |
| Run/Reaction Monitor | Operation status monitor on screen |
| Quality Control | Levey - Jennings Graphics - Westgard Algorithm |
| Operator Interface | Included touch screen 10”- Intel HD Graphics SO windows - 4 GB DDR3 SDRAM Processore Intel® Pentium® Gold 6500Y dual-core - SSD 64GB |
| Connections | Wi-Fi 6: compatibile con IEEE 802.11 a/b/g/n/ac/ax for LIS conection and Backup on cloud wireless Bluetooth Tecnology 5.0 |
| Printer | Wireless External Printer not included |
| Environmental | 16 - 30 °C, < 80 % humidity |
